How to Install Stucco

Widely known to homeowners, stucco is a popular choice among exterior or even interior finishes. Its main components are water, Portland cement, sand, and lime. Doing this will require patience, as it needs quite a lot of time and attention. However, all efforts will be worth it as you see how good it looks in your house.

Here are steps to help you do stucco on your home:

Preparation

When planning to stucco a wall, you have to remove anything on it. Then, remove furniture around the area. Cover the floor, pavement, or unmovable object with cloth secured with painter’s tape. 

You may pressure wash exterior walls, but if you are applying stucco inside, use a sponge and warm water with detergent. Get rid of dirt, dust, and grime. Rinse it thoroughly and allow it to dry. 

Next, mask off windows and other fixtures. Ensure that they are applied properly, so the result will look as professional as it can be. Then, fill holes and cracks with spackling compound and let them cure for at least 8 hours. 

Now, you have to prepare the wall. For concrete or brick walls, you must use a bonding agent, while wood walls will need nail roofing felts or stucco wraps and gauge metal netting.

Application

For interior, you might want to use textured stucco paint for an easier and cleaner job. Ask your paint dealer for help, as stucco paint will require more materials than regular paint jobs. For exterior jobs, you may want to choose sand stucco. You may also mix the stucco yourself with the ratio 4:12:1, cement, sand, and lime. Make sure that you get the correct consistency.

Experiment on a scrap piece of wood on what texture you want to achieve. Try using a trowel, sponge, roller, or brush. When you are ready, you may apply the scratch coat.

The first layer is usually applied to the wire mesh. Make sure that you apply it evenly and carefully. Force it through the mesh and spread it until it reaches a thickness of 3/8 inch. Scratch the surface and make ridges after it stiffens a bit. That is to make sure that the next layer will adhere properly.

After the first layer finishes curing for 2 days, you may now apply the brown coat. Keep it moist so you can work easily. After filling the wall, use a darby or feather edge to smooth it. Wait for it to dry for at least one week.

For the final layer, spread it to a thickness of 1/8 inch. Then, you may use different materials and techniques to give it the texture you want. You may use a sponge, trowel, brush, or others. After that, let it cure for several days. You may paint it after six weeks. 

Your stuccoed home will surely satisfy you when it is finished. Ensure that you use the proper materials to do a great job. Be patient and don’t hurry. Take the time you need for the stucco, and you will get the result you want.

How to Price Stucco Job

Stucco installation, removal, resurfacing and repair come with various range of pricing options. There are many factors that could affect the cost of your stucco – the kind of service that you need either repair or installation; the type of stucco and materials that you will use; the scope of the area that you want the stucco to cover; additional repair to the base framework; and other extra furnishings added.

In this article, we will focus on the cost of labor across different stucco jobs: 

Stucco Labor Cost

When installing your stucco, the labor cost accounts for 25% to 33% of the total cost. This labor cost will cost more for a three-coat stucco and ess for a one-coat stucco.

The average range for the stucco labor costs is around $2 to $3 per square foot or about 30% of the total cost. This includes the equipment costs adding $0.40 per square foot. The average cost of labor in stucco installation is around $35 to $50 per hour per laborer. Usually, it takes at least three workers and three days to finish the installation.

The state or region you live in will determine the exact labor cost for the job. 

Stucco Inspection Cost

On average, the inspection cost for stucco installation is about $900 with most people spending between $600 to $1,200. These estimated costs are based on different conditions such as the location, the size of the property, and the square footage of stucco. 

Prior to installation, a stucco inspector normally performs a visual inspection to check if there are any damages that need to be repaired first before working on the stucco and to ensure that the stucco is being properly installed.

Stucco Removal Cost 

The average estimated cost for stucco removal on metal lath is around $1.05 per square foot and $1.20 per square foot on wood lath. While on the average home, the anticipated stucco removal cost is between  $900 and $2,100. The cost may go higher if your walls are over 8’ high and need scaffolding. 

Cost to Remove Old Stucco Siding 

If the old stucco siding has to be removed, it can be easy for a homeowner that has some experience working on ladders and scaffolding.  Otherwise, you will need a professional to do the job for you. Here are the estimated costs for professional removal and disposal of the stucco siding.

Stucco siding: $2.50-$4 per square foot

Aluminum or vinyl siding: $1-$2.25 per square foot

Your previous stucco siding will be removed and broken down into movable parts using hand tools. You may add the cost if there are any necessary flashing and caulking needed. Depending on the company you hire, there may be an additional charge for the disposal fee as your old siding has to be trashed. 

Stucco Resurfacing Cost

The estimated cost of stucco resurfacing costs is around $3 to $6 per square foot. If there are several cracks on the wall, it may need to be re-applied. The cost depends on the existing condition of the stucco and the finishing you prefer. However, if the lath is loosening from the studs or mixture has entered underneath, there’s a need for complete removal of the stucco.

Stucco Repair Cost

Usually, the estimated cost for stucco repair is around $8 to $50 per square foot or from $200 to $800 on average for a patch and touch-up painting. This price range depends on the condition of the base framework. If there are holes or cracks in the wall, the cost of fixing these may add up to the total price.

How to Repair Large Stucco Holes

Investments are essential to us, and one of the most major ones is probably your house. Naturally, you want to keep it presentable. One of the choices you may do is applying stucco finish to your exterior walls. That is a great option because of the numerous advantages you may get. It is fireproof, durable, and low maintenance. However, you will still need to repair it if ever it gets damaged.

One of the common damages your stucco may have are holes. If you do not take care of them at once, you may find yourself having a larger problem. These holes may be easily taken advantage of by moisture or fungi that can make it blister or have efflorescence. Make sure to take care of problems right away to prevent bigger ones. 

Overview

The process for repairing holes is quite simple, especially if they are small ones. However, it will get more complicated if the damage is larger. You will need more materials and tools to do it.

Materials:

You will need metal snips, protective equipment, new metal lath, stucco mix, trowel, float, and double D building paper.

Preparation

First, you should prepare yourself and wear proper protective equipment and work clothes. You may also prepare the area around you by masking them off with painters tape and cloth to avoid getting cement all over the place. Make sure that your materials and tools are ready and handy. 

Cleaning

Get your wire brush and get rid of dirt, debris, peeling paint, and loose stucco from the damage. Make sure that you are gentle and careful, so you won’t damage the ones that are still attached to the wall. Cut out the metal lath from the damaged area using your metal snips.

Repair

Cover the exposed area with two layers of double D building paper. Cut a suitable size that will fit in it and staple the first layer before adding the second one. Doing that is essential to create a moisture barrier and protect the wood behind. 

Cut a piece of metal lath to replace the old one that you just removed. Place it in a way that it will overlap with the other metal lath. Secure it with roofing nails and make sure it will penetrate the wood by at least an inch.

Prepare your stucco mix. You may get one that is already pre-made. You can get them in local hardware stores in your area. You may also make your own, but make sure you correctly get the proportions for sand, cement, and lime. Add enough water, so it is workable, but not saggy. Keep it somewhere shaded. It will have a working time of 45 hours, so make sure you only mix what you need at a time.

Wet the area with some water and trowel the first layer of stucco. Make sure that it adheres to the old stucco properly. Scratch the surface and let it cure properly.

Then, apply the brown coat like how you did the first one. Make sure that it is uniform in thickness.

Apply the final coat and let it cure properly.

Maintain your stucco even if it may not need too much effort. That way, it will keep your house pretty for months to come.

How To Replace A Rainbird Sprinkler Head

Winter is the time of the year when people take precautionary measures to protect their outdoor equipment or property from the damaging effects of harsh weather. This is particularly true for those who are residing in the northern area where the weather is significantly colder than other parts of the country.

Some outdoor equipment is placed indoors or in the garage to protect them from the harmful effects of freezing weather. But some stuff cannot be detached and must remain in places such as lawn sprinkler systems and drip irrigation for landscapes. Both of them must be protected against freezing. But is it possible if they must remain exposed to strong weather conditions? 

In this article, we will be focusing on the lawn sprinkler system and the most common ways to protect it from any cold weather condition. 

Read on the following procedures that you can do by yourself on how to blow out your sprinkler system:

  1. Find the main switch button of your water sprinkler system and turn it off. This is to ensure that the water will no longer flow in the sprinkler. You may find the master shut off valve in the basement, utility room, or outdoor shed. The location varies depending on the type of system you have and how it was built. 
  2. Drain the water from the sprinkler system, manually. Open the hose bib to lessen the pressure flowing through your system’s pipes. Drain the water running from the pipers in a large bucket. Just keep in mind that the water will shoot because of the pressure in the pipes, and you are most likely to get wet. 
  3. Buy an air compressor from any of your local hardware stores, or if you don’t want to buy one, you can rent it from your local equipment rental yard. Charge the compressor to 60 pounds per square inch, as experts recommended. Most compressors have the maximum capacity to charge up to 120 pounds per square inch. But don’t charge your air compressor at that level, as too much pressure can cause damage to your sprinkler system. 
  4. Once your compressor is sufficiently charged, connect it to the hose bib. Make sure that the compressor is switched off while doing this. When attaching your compressor to the hose bib, make sure to get creative in securing a seal because most of the time, the air compressor and the hose bib’s fittings don’t exactly match.
  5. Switch on the air compressor and empty the hoses. Begin with the farthest area from you and work your way to the nearest. Keep the air compressor working for at least two minutes in every zone. The water will sprinkle from the system as you do this. You’re done with the process once you’re finished with the nearest zone. 
  6. Disconnect the air compressor from the hose bib and keep everything in proper places. 

This can be a simple job if you are used to taking care of lawns and sprinkler systems. If this is your first time doing this task, be careful with handling the equipment like an air compressor. Always read the manual instructions before operating. 

How To Cut Concrete Pavers

Concrete is used on various home projects for its amazing properties. Of course, it is also a common material for paving stones or pavers. When you use them for that, you may need to cut them to suit the place you are going to put it. You may do that for edges or corners.

In this guide, we are going to help you know how to cut concrete pavers. They are tough, so follow us and the options we are going to present to you, so you can do it correctly.

Preparation

Before you start, make sure that you are wearing the proper equipment and clothing. Protect yourself from all the harm you may encounter in doing your work. You may also get all the materials that you think will come in handy.

1.Chisel and Lump Hammer

The old-fashioned way of cutting concrete pavers is using a chisel. You may want to mark the area that you want to cut off. It will make things easier and make sure that you do it correctly. Hold the chisel on the line, then bring it down with a lump hammer, applying steady force. Repeat the process twice or thrice, until the piece you want to remove falls off. If there are uneven edges, then you can use your chisel to make it look better.

2.Hand-held Saw

Another option for you to use is a hand-held power saw. Set up your work stand and secure the paver. Make sure that you will use a blade that is suitable for the work, like carbide or diamond-tipped. Never attempt using ones which are only meant for wood. You may need to do it from one up to three passes to do the work. It is significantly faster and easier. However, they are not very useful when you are doing and angled cut.

3.Table Saw

You may also use a table saw to cut off your concrete paver. Remember to change the blade to one that is suitable for the work you will do. Table saws are more powerful than hand-held ones, so one pass is probably enough to do it. However, like the hand-held saw, it is very hard to do an angled cut.

4.Specialty Saws

There are also saws specially made for cutting concrete pavers. However, you may not have one on your home, so you may need to rent it from your local hardware store. If you want it as an investment, then purchasing one is also good. They are like small table saws that you may attach to a hose and keep the area wet. They are very useful when you know how to maximize their use.

If you are doing a home project, you may need to consult some experts if you need help, especially if you do not have the tools. It is better to ask them, so you can efficiently do your job. It will make everything easier and faster for you. Contact one now and successfully do your project.

What Are The Disadvantages Of Concrete

The main purpose of the sprinkler system is to properly distribute the required amount of water to different parts of the lawn. You can leave it all year round, or you can turn it off before the cold season begins. Regardless of your desired settings, it is important to know when and how to turn off the water from your Rain Bird sprinkler system.

If you have no idea how to turn off the water in your sprinkler system, do not worry because it is quite an easy job to do. Many homeowners have the same concern, but they eventually managed and learned how to operate their Rain Bird sprinkler system from minor adjustments to completely shutting it off. In most cases, the sprinkler system is switched off before or during the cold months. This is because most of the plants do not require as much watering on cold seasons as they are during summer.

The winter could bring about a lot of moisture and even rain that naturally keeps the grass well-hydrated. Shutting off your sprinkler system during this time of the year could potentially save you money, and it could also help you to conserve water. 

There are four ways to switch off your Rain Bird sprinkler system:

You can turn it off at the point of connection, at the controller, and the ball valve shut-off, or the water meter. 

Turning the sprinkler system off at the controller 

To turn off your Rain Bird sprinkler system at the controller, first, you have to locate the controller of your sprinkler. It is usually installed within your garage area and mounted to an exterior wall. Grip the know or the dial on the controller and turn it towards the off position. Most of the sprinkler system’s controllers have a user manual that can be searched online. Do you due diligence and check from your manufacturer’s website how to properly switch it off. 

Your sprinkler system has to be switched off at the controller for the following reasons:

Freezing temperatures or rain

Luckily, for most of the new sprinkler systems, they are equipped with a sensor system that can detect rain or freezing temperatures. These types of sprinklers can sense precipitation occurrences, and automatically switches off as a response to its sensor. Once it turns off, it also stops blowing water. However, if your sprinkler system does not have this kind of sensor, you may need to watch the weather to determine if you need to turn your sprinkler off. Keep in mind that some cities in our country issue fines for watering your yard during rain or freezing temperatures.  

Winter season

In some parts of the country, you can skip watering the lawn and other landscaping during the winter season. This is because most vegetation goes to its dormant stage. Switching off your sprinkler system during this time of the year can significantly save you money and water. 

You are on vacation

If you are planning to go on vacation for a specific period of time, you can turn off your sprinkler system to avoid overwatering your lawn that could create a pool of water that eventually destroys your plants. Doing this can also prevent a situation wherein the sprinkler will not turn off on its own once it starts spraying water. Both of these situations can cost you to expend a lot of water and money on the utilities. Additionally, overwatering is harmful to most plants and foliage in your garden. It’s better to turn it off than to risk running puddles in your yard. 

Turning the sprinkler system off at the ball valve shut- off 

New sprinkler systems are equipped with polyvinyl chloride (PVC) ball valves that can be used as a reliable shut-off. If your sprinkler system possesses this kind of shut-off valve, you can usually find it in the parkway in front of the house, between the street and sidewalk. It is located on the sprinkler system side and not on the water meter side. This PVC ball is quite easy to use. Simply turn the level 90 degrees to shut off the valve and prevent the water flow to your sprinkler system. 

 Turning the sprinkler system off at the point of connection 

If there is a leakage in your controller or it is simply broken, you can turn the sprinkler system off at the point of connection instead. In this way, you can still stop the flow of water in your sprinkler head. You can locate this point of connection near the water meter. There are two levers inside the point of connection. One lever shuts-off the valves that block the water flowing into the box from the water meter, and the other one manages the water that flows out of the box from the water meter. It doesn’t really matter which valve you turn off. Either valve will prevent water from spraying from your sprinkler. 

To turn off the valve, rotate the lever 90 degrees. If you rotate it to 180 degrees, the valve will close and open again. If you notice that the valve is damaged or rusty, refrain from turning it. This is one of the scenarios that you need to call a pro.

 Turning the sprinkler system off at the water meter 

This is the last resort. If every attempt above fails, you can shut down the water meter. But keep in mind that turning off the water meter will also prevent the water flowing to your house. To turn off the water meter, turn its handle at full 180 degrees. In some cases, you may need a special key to access the water meter box. 

What Is the Difference Between a Cinder Block and Concrete Block

Cinder blocks and concrete blocks have some fundamental differences that can be traced down to their core ingredients. At first glance, it’s hard to determine their differences due to their shared fundamental properties, but a closer look could help us point out their utmost differences. Most often, people interchange the two, thinking that they are alike. This misconception arises from the fact that at first glance, the differences are covert. Even though similar materials are used in their construction, the cinder block has extra material on it. 

Main features of Concrete Blocks: 

  • Usually heavier than the cinder blocks 
  • Can withstand high pressure 
  • Contains steel, cement or wood 
  • Have a significant tensile strength that makes it ideal for tougher structures 
  • Cinder blocks are made of concrete and coal cinders or ash. It is known as the remains of burned coal. Usually, in karate demonstrations, they are using cinder blocks instead of concrete blocks. Unlike concrete blocks that suit large construction projects, cinder blocks are often used in small projects like garden walls or small wall division. 

Main features of Cinder Blocks: 

  • They re lighter than concrete blocks 
  • Both contain concrete and coal cinders 
  • It tends to bow and buckle 
  • They do not have a substantial tensile strength
  • They can’t use in big construction projects because of their strength capacity 
  • The repair is usually expensive that’s why they aren’t recommended in locations that are prone to a high risk of damage 
  • It used as a safety barrier 
  • It’s also use to decorate the wall 
  • They’re use for foxing doors and windows 
  • Useful in differentiating the appearance of structures

Comparison between the cinder block and the concrete block 

Cinder Block:

  • Ash is the main aggregate in the cinder block.
  • Ash is the main aggregate in the cinder block.
  • Cinder block has a hollow rectangular form.
  • Cinder blocks have not been massively produced in nearly 50 years. Thus, it is considered as an old fashioned building material. 
  • Cinder block is made up of both cinder ash remains and concrete.
  • Cinder block is lighter than the concrete block. These make them ideal for small construction projects.
  • Most building codes do not allow the use of cinder blocks because it is not as flexible as the concrete block.

Concrete Block:

  • The concrete block also consists of fly ash in the building of masonry units.
  • Concrete block, due to its strength, does not need a lot of repairs. Therefore, it is more cost-efficient in the long run. The concrete block also consists of fly ash in the building of masonry units.
  • A concrete block is structure flat and concrete. 
  • Concrete blocks are massively used until today because of its durability and structural strength 
  • A concrete block is a hard, strong, and durable material that can withstand high pressure.
  • A concrete block consists of aggregates such as stones and sands, making it heavier than the cinder block.

Now that you know the key differences between concrete blocks and cinder blocks, you can easily decide which one to use in your construction project. A heavy-duty, large building construction will need strong and durable materials that can be found on the concrete block, while a small backyard or garden project will not require a strong tensile strength.

Therefore, a cinder block is good enough for such a project. Choosing which block to use depends on the type and size of the project you are building. Most of the property owners prefer to use concrete blocks for long-lasting durability and strength, as well as flexibility in terms of possible alteration. But there are still some who prefer cinder blocks due to its lightweight property. 

How to Install A Shower Pan On A Concrete Floor

Oh! I heard that you are now in the process of renovating your bathroom. A bathroom is one of the most important parts of a house. Sometimes, this is the right place to relax and contemplate life. One of the necessities to have a comfortable bathroom is having a shower pan on the concrete floor. Its purpose is not just for making your bathroom more beautiful but also for safety and concrete floor durability.

Before we start on how to install a shower pan, let’s first define what it is for us to understand more.

A shower pan is the base of a shower that collects the water. It has a non-slippery texture that prevents you from having any other accidents while taking a bath. Most of the shower pans are made up of acrylic or maybe, fibreglass. You can make your own shower pan but for efficiency, there are manufacturers that are producing this kind of material. 

Why do I need to install a shower pan?

You need to install a shower pan not just for the sake of designs but more importantly, for the sake of safety and for concrete to last longer. Since shower pan has a non-slippery texture, it would help you to avoid accidents in the future. Concrete also absorbs water and if concrete continuously and tirelessly absorbs water in everyday life, expect that your concrete will be damaged shortly.

Installing a shower pan only involves easy steps as long as you have the right equipment to use.

Here are the lists of things that you need to have:

  1. Hammer
  2. Tape measure
  3. Pliers
  4. Wet saw
  5. Screwdriver
  6. Level indicator
  7. Silicone
  8. Masking tape

Before we start installing the shower pan, it is important to get the right and exact measurements. No more no less policy must be implemented. The measurement must be exact strictly to ensure the goodness of the shower pan on catching every water that will fall every time that you use the shower.

Next thing, make a shower drain. It is a necessary thing to have drainage. You do not want to be flooded by used water, right? To make this, here are the procedures.

First, Set a tray that is connected to the drain.

Second, wait for the cement to dry. Do not put the body hole first because we need to set the shower pan before putting it.

Third, Pour water to ensure that the holes can drain and has no problem with draining.

Let’s get it on and install your shower pan!

Use a level indicator to make sure that the concrete floor is consistent on its level. Water will not flow properly if the surface is not flat. Apply a roofing paper and vinyl sheets to make the shower pan waterproof. That is needed because water can be absorbed by the concrete and it may lead to damages such as cracks. The shower pan is easy to apply because we have set it on its exact measure a while ago. Install the shower drain and screw it. So, that’s it! We just need to perform a water test to ensure that the drainage and shower pan works well.

In doing this, you only need a short time to accomplish all of it if you are guided responsibly and if you have the right equipment needed. When things do not go with what you planned, just fix it right away to avoid more serious damage.

How Long Does It Take For Concrete to Dry

Concrete is a common material for construction. It is made of cement, fine aggregates, coarse aggregates, and water. It is great for making columns, beams, and foundations. Because it is created by mixing materials and applied as a wet mixture, it has to dry out.

Approximately, concrete will dry in 24 to 48 hours. However, it will take at least 28 days before you can make sure that it achieved its “full effective strength.”

Curing Time

Actually, concrete does not finish curing, ever. That is because it gets harder every day. That is a function of the cement particles that you mixed with the water. The concrete has tiny moisture bubbles and the cement will bond with them, so it will keep getting slightly harder and harder. 

If you need the concrete for a specific reason, then you might want to consider that before deciding the length of time you let it dry. That is because its strength will depend on it. 

If you are going to walk or drive on your concrete, you may think about how many days will it take for you to do that without sinking. Actually, it will only take one to two days. After a week, the concrete will already achieve at least 70% of its strength. Do not worry if you are planning on driving on it because it won’t get damaged. However, be careful if you want to move some heavy equipment, you may have to do that after twenty-eight days.

Factors That Affect Drying Time

For your information, there are also factors that may affect the time your concrete takes to dry. It is not consistent and will depend on the conditions you have in your area.

One of the factors is moisture. If you put in less water into your cement mixture, then it will dry quickly. However, because there are no moisture bubbles, then the particles won’t make bonds. Because of that, the strength of your concrete will be poor. If there is too much water, then it may dry for too long and have some flaking on the top layer. It is essential that you only add enough water to the mixture so it is workable, but not saggy, and you will end up with a strong concrete.

Another factor that may affect your concrete drying time is temperature and weather. If it is hot outside, then it will dry faster. If you have cold weather, you may cover the drying concrete with a concrete blanket which is designed to raise the temperature and make it dry quicker. That is very useful if you want to speed up the drying time and if it is too cold.

Lastly, the mixture you made is also going to affect the drying time. When you are mixing the cement, you may add some accelerant, which will speed up the process. However, it may not be as strong as other concrete that did not have accelerants.

Drying your concrete may need some patience, but if you want it to be strong, then you have to be ready to wait. 

Where to Find an Air Conditioner Capacitor

Inside your air conditioner are components that help your unit run efficiently, smoothly, and properly. One of these essential components is the capacitor. It is a tiny, cylindrical, or round object that stores and supplies energy to the unit, especially during start-up. When your air conditioner breaks down at some point, the problem might be coming from a bad capacitor. If you have to replace it, you have to find the same model and the one that suits your unit.

Here are some places where you can find a capacitor:

Nearby HVAC Stores

Most of the time, local HVAC stores near you have everything that you need, especially capacitors. Go to the nearest store and ask the store clerk about the capacitor that will match your air conditioner. It is better if you have the faulty capacitor with you so that they will know what exactly you are looking for.

Online HVAC Stores

You can always search the web for online HVAC stores. Before searching for a capacitor online, make sure that you know all the information your previous capacitor has. Before buying, always check the reviews submitted by other buyers. Online stores are highly accessible, but you’ll have to wait for a while as they ship your item to your door.

To make sure that you are buying the capacitor that is suitable for your air conditioner, here are some capacitor information you will need to know about:

Capacitor Type

Usually, there are two types of capacitors you can find inside your air conditioner. They are called run capacitors, and the other is called a start capacitor. Run capacitor helps your unit from start-ups, even until your unit is running. While the other only helps your unit during start-ups. 

Capacitance Value 

One piece of information you have to take note of is the capacitance value. This is printed on the side of your capacitor. Usually, there are two types of capacitors. One is a run capacitor, and the other is a start capacitor. Of course, they will have different capacitance values. Find a capacitor that has a capacitance value matching your old one.

Capacitor Voltage

The capacitor you need to buy should match your old capacitor’s voltage. Knowing this information is very essential for your unit. This information is easily visible as it is printed on the side of the capacitor. If it happens to be erased, it’s usually indicated inside your unit’s manual. 

Capacitor Shape

The capacitor shape will also tell you that it has a different job than other capacitors, so this is very important to take note of. Some capacitor shapes may vary from others, so you have to keep this in mind and buy a capacitor that will match your old capacitor’s shape.

If you are confused about what capacitor you should buy, don’t be afraid to contact your trusted HVAC contractor. If your unit is still under warranty, it is best to let them handle this problem.